Whether it is in our lives or in our work, there are many places where hardware products are needed. Although the hardware parts do not look very eye-catching, they play a very important role. How to process mechanical hardware parts? What is the process? 　

Process 1: When processing the product, the operator needs to maintain the correct posture, and he needs to have full energy to cope with the work. If physical discomfort is found, the operator needs to leave the job immediately and report to the workshop supervisor or more for the safety of the operator. High-level leaders report the situation;

Concentration is required during operation, chatting is strictly prohibited, and mutual cooperation is required. Operators are not allowed to operate in a state of irritability and exhaustion. In order to avoid safety accidents, it is necessary to operate norms. All employees need it before going to their posts. Check whether your clothing meets the needs of the job. You cannot wear slippers, high heels, or clothing that affects safety production. If you have long hair, you need to wear a hard hat or a hood to put your hair in;

Process 2: Before machining, it is necessary to check whether the moving parts have been filled with lubricating oil and check whether the brake and clutch are normal, and the machine tool is idling for 1-3 minutes. If the machine tool is found to have abnormal noise, it needs to be stopped immediately. It is strictly forbidden operate;

Process three. When changing the mold, you need to turn off the power first. If it is a punch, you need to wait until the moving parts of the punch completely stop running. Unnecessary collisions between products, the upper and lower molds need to be checked whether they are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is above a reasonable position;

　　 Process four, wait until all other personnel have left the machine working area and removed the sundries on the work surface before turning on the power to start the machine for production;

Process 5, when hardware machinery is working, it is strictly forbidden to reach into the working area of the slider, and it is forbidden to directly pick and place the workpiece by hand. When picking and placing the parts in the die, you need to use standard tools. If you find abnormal sound from the machine Or when the machine fails, you should immediately turn off the power switch and perform an inspection. After the hardware machine tool is started, one person should transport the material and operate the machine. Others are prohibited from pressing the machine button or pedaling switch. For the safety of others, let alone Put your hand in the working area of the machine or touch the moving part of the machine with your hand;

　The above are the five processes of hardware parts processing.